I don’t have the luxury of a lift, so we are working on the undercarriage in sections, I’m not real comfortable with the car up on jack stands at all four corners, so we do a little at a time. Today we touched up some spots on the frame and undercoated the rest of the underside. So now she is done from the front bumper mounts back to the end of the transmission tunnel. Earlier, we had done from the rear bumper mounts forward to the rear axle, so that all that is left is the center of the car from the rear of the transmission to the rear axle.
I stopped in to see Richie at Fulvi Radiator and he installed the lower shaft in preparation to install suspension parts. 
I would have done it, but did not have wrenches big enough and they needed to be torqued down to 175 lbs. While there I checked on the status of the engine and found that we are on hold for the moment. There is a huge road construction project in that part of town and the gas line has been shut off, all of my parts have been cleaned and are sitting in the oven waiting to be baked so we just have to wait for the gas to be turned back on.
