As we get ready to take our lit­tle break, I thought it would be cool to try and item­ize the items we have accom­plished in the last four months, so here goes.  These are all of the items we man­aged to com­plete and install to this point.

Brake Sys­tem

1. Four new wheel cylinders
2. All new Stain­less Steel brake lines
3. All four drums turned & painted
4. New shoes, springs & hard­ware on all wheels
5. Rebuilt mas­ter cylin­der & booster (Bendix)

Body

1. Frame cleaned and painted with POR-15
2. Under­coat­ing touched-up & re-done
3. Rear bumper ends repaired & re-plated
4. Rear bumper bar re-plated
5. Com­plete inte­rior cleaning
6. Fire­wall evap­o­ra­tors repaired & painted
7. Wire har­ness, cleaned, checked & secured

Exhaust

1. New heat con­trol diverter
2. All new pipes
3. New muf­flers
4. New res­onators

Fuel Sys­tem

1. Gas tank boiled out, tested, repainted & installed
2. New stain­less steel fuel line
3. New fuel pump
4. New fuel filter

Mechan­i­cals

1. Com­plete engine rebuild
2. New radi­a­tor
3. Rear Seal (Transmission)
4. Trans­mis­sion fil­ter cleaned & re-installed
5. New engine mounts
6. New Trans­mis­sion mount
7. New water pump
8. New uni­ver­sal joints (Driveshaft)
9. Rear axle cleaned & painted
10. New dif­fer­en­tial gasket
11. New axle seals
12. Heater core boiled out, tested & painted
13. Heater fan cleaned, tested & painted

Sus­pen­sion (Front)

1. New wheel bear­ings & seals
2. New upper con­trol arm shafts, bush­ings & seals
3. New lower con­trol arm shafts, bush­ings & seals
4. New shocks
5. New spring insulators
6. New idler arm
7. Drag link (cen­ter) com­pletely rebuilt w/new parts
8. New sway bar links
9. New rub­ber stops
10. New upper & lower ball joints
11. New tie rod ends

Sus­pen­sion (Rear)

1. New bear­ings & seals
2. New lower con­trol arm bush­ings (front & rear)
3. New upper yoke bushings
4. New rear ball joint
5. New spring insulators
6. New shocks

Share on Facebook